• Vape tweezers are revolutionary and multifunctional tools for vapers. The tweezer is a perfect tool with ceramic heat-consistence tweezers on the one end and a wrench on the other,which allows you to unthread stuck bottom ends with ease.
    Constructed from high-performance polycarbonate and ceramic.

    If you have a tightly-fit tank and you cannot pull it apart, you really should try Coil Master vape tweezer out. Fix the tweezer in your atomizer, squeeze it and turn the tank,then you will find it super easy to loosen and unthread the stuck bottom ends.It is a great helper to get your cap out of your rda as well.Vape smart with the smart vape tweezers!

    Apply to atomizers of 22-25mm in diameter

    DIY Vape Tweezers Multi Tool

    SKU: N/A Categories: ,
  • Charge your battery with the Efest Slim K1 Charger. The Efest Slim K1 Charger is a high quality with a cost-efficient and portable design. The Efest Slim K1 Charger is a single slot charger with Micro USB input and charges at 1A. The LED indicates when your battery is charging and when the battery is fully charged. The Efest Slim K1 Charger features reverse polarity, short circuit, overcharge protection and many more safety features. The Efest Slim K1 Charger can charge different types of 3.6V/3.7V lithium batteries commonly used in electronic cigarettes, flashlights, electric tools, and more.

    Efest K1 Slim

  • Replacement Glass


    Replacement Glass

    SKU: N/A Categories: ,
  • Samsung 48g 4800MAH 20700

    Categories: ,
  • Vape Away


    Like to vape in your car?

    But can’t see through your windshield?

    Try VAPE AWAY Windshield Solution

    by ThisStuffWorks.ca!

    Vape Away

    Categories: ,
  • 18650 Dual Battery Case

    Categories: ,
  • The newest Coil Master DIY Kit V3 is a perfect all-in-one kit for DIY users. All tools are High-Quality made to reach various needs of users.

    1. 1 x Diagonal pliers
    2. 1 x Needle-nose pliers
    3. 1 x Stainless steel folding scissors
    4. 1 x Pen styled Phillips screwdriver
    5. 1 x Pen styled Flathead screwdriver
    6. 1 x Ceramic Tweezer (T1)
    7. 1 x Elbow Tweezer (T3)
    8. 1 x 10 ft 24 GA Kanthal A1 Wire
    9. 1 x 521 Mini Tab
    10. 1 x Coiling Kit V4
    11. 1 x Silicon rubber case for jigs
    12. 1 x T styled HEX screwdriver (x 1.25mm, x 1.5mm, x 2.0mm)
    13. 3 x Japanese Organic Cotton

    Coil Master DIY Kit V3

    Categories: ,
  • Coiling Jig V4!
    Like before, with the double-sized top caps and the larger size, simply slip in any gauge wire, spin the cap away to your desired resistance and voila!
    And the Coiling Jig V4 Just Make Coil Building Much More Easier!
    The main changes are:
    1. A silicone holder is added to store the parts.
    2. A Wide slot is added to hold up ribbon and wire.
    The Coil Master Coiling Jig V4– 6 in 1 is a great accessory to own!

    Package includes:
    1*Silicone Holder
    6*Coiling Poles(1.5, 2.0, 2.5, 3.0, 3.5,4.0mm )
    3*Top Covers

    Coil Master V3

    Categories: ,
  • This Does Not Come With A Charger

    Aspire CF VV 1300MAH

  • iJoy 20700MAH

  • Samsung 25R 2500MAH

  • Samsung INR18650-30Q 3000mAh Battery – Flat Top

    Manufacturer’s Specs:

    Flat Top
    Nominal capacity: 3000 mah
    Max Continuous Rated Discharge: 15 amps (at 25 degrees C)
    Nominal voltage: 3.6v
    After a fresh charge: 4.2v
    Cycle info: Capacity drops to 60% after 250 full charge/discharge Cycles
    Don’t discharge below: 2.5v
    Standard Charge: CC/CV @ 1 amp / 4.20 volts +/- .05v, 100 mA cut-off
    (Max) Rapid Charge: CC/CV @ 4amps / 4.20 volts +/- .05v, 100 mA cut-off
    Impedance: 22.15 +/- 2 milliohms
    Weight: 45g
    Height: 64.85 +/- 0.15mm
    Diameter: 18.33 +/- 0.07mm
    Operational Charging Temperature Range: 0 to 50 degrees C (best below 45 degrees C)
    Operational Discharging Temperature Range: -20 to +75 degrees C (best below 60 degrees C)
    You can store them for 1.5 years at -30 to + 25 degrees C, 3 months at 30 to 45 C and 1 month at 30 to 60 C (in other words, store them in a cool place and they’ll last longer)


    Samsung 30Q 3000MAH

  • Nitecore has outdone itself once again with this truly universal four channel charger. Its sleek and succinct digital display is coupled with advanced circuitry that allows for unprecedented compatibility with a huge range of battery sizes and chemistry types. Insert your battery into one of the D4’s independent charge channels. Each one is separately controlled by the Digicharger’s micro-computer so a variety of batteries can be charged simultaneously. The charger will automatically Detect the cell’s voltage and chemistry and apply the optimal charging mode. The Digicharger will charge almost any cylindrical rechargeable cell whether it’s Li-ion, IMR, Ni-MH, Ni-CD, or LiFePO4 (LiFePO4 batteries require the charge mode to be set manually). An automatic power-off function will terminate current when charging is complete.

    On top of this charger’s incredible universality, it also includes a comprehensive display to keep you in the loop. The crystalline LCD display presents charging progress, battery type, voltage, charging current, and charging time in an easy-to-read and ultra-clear manner. When charging is finished the display will tell you which channel is ready to go.

    Nitecore D4

  • The Nitecore D2 Digicharger is a universal intelligent digital charger, perfect for safely and efficiently recharge your mod’s batteries.

    Compatible with any 18650, 18490, 18500, 18350, 26650, and even more type of batteries (see below), the Nitecore D2 will automatically detect which type of battery you are using between Li-Ion, IMR, INR, Ni-MH, Ni-Cd, selecting the appropriate charging mode accordingly (between CC, CV, dV/dt). You can also manually set it for use with LiFePO4 batteries.

    The D2’s two separate charging slots are managed independently, allowing you to charge different types of batteries at the same time safely.

    The large digital LDC screen displays the charging progress used for each battery, the actual voltage, current, and how much time it has been charging.

    An intelligent automatic power-off function terminates current when the charging is complete, preventing you from overcharging the battery if you leave it too long in the charging slot.

    Nitecore D2

  • The Efest LUC V6 is a universal LCD six-bay charger for your mod batteries of all type, including popular 18350, 18650, and 26650, and a variety of other lithium batteries. Its six built-in independent charging channels can automatically monitor battery power and capacity, and give an independent alarm notice in case of problem, since its channels as its own protection features. It offers two charging modes (0.68A and 2A) that can be changed by pressing the rectangular button on the device.

    Efest LUC V6

  • Replacement Charger specialized for EVOD batteries from Kangertech.
    *This is not for charging E-Smart batteries.
    Input Voltage: DC 5V
    Output Voltage: DC 4.2V
    Output Current: 400mA

    Kangertech Evod USB